Products
- Deck Covering
- Light Primary Deck Covering
- Super Light Primary Deck
- Class A-60 Light Floating
- Class A-60 High Sound Insulation
- DKY-GF Type Class A-60 High
- Class A-60 light fireproof Deck
- Flat Deck Covering Type DKY-5
- ClassA-60 Light composite
- Light Self-Leveling Primary Deck
- Ultralight Self-Leveling Primary
- Ceramic adhesive Type DKY-J1
- Floor tile seam filling agent
- Cement covering Type DKY-S
- Marine-use Assembly Cold
- Integral Cold Storage Unit
- Fittings for refrigerating
- Marine Shading shutter
Contact us
Jingjiang Dakeyuan New Material Engineering Co., Ltd.
Contact：Mr. Yuan
Phone：13809011028
Contact：Mr. Jiang
Phone：13809082860
Tel: 0523-89195899 84240399
Fax：0523-84240299
Email：dky218@vip.163.com
Web：
Adds：No. 8 Xiexin Road, Xieqiao Town, Jingjiang City
Ceramic adhesive Type DKY-J1
◇ Product Introduction
DKY-J1 ceramic adhesive is a new type of adhesive product with high strength and strong adhesion, which has the characteristics of simple proportion, convenient construction, short coagulation time, flame retardant, not easy to sag, non-toxic, good water resistance, and no harm to the skin, and has good adhesion with cement mortar, concrete, stone, ceramic materials and other media. Solve the quality defects caused by traditional cement laying, such as low strength, poor water resistance, hollowing, and frequent falling off.
◇ Product Use:：
This product is suitable for laying large area floor tiles in civil buildings and laying various ceramic finishing materials in wet cabins such as ship galleys, pantry rooms, cold storage, toilets, etc。
◇ Product Specifications
：
：|
Density |
≤2000kg/m3 |
|
Shear strength |
≥2.8MPa |
|
Water resistance |
Soak continuously for 48 hours without softening |
◇ Packing and Usage
：
：|
latex（Component A） |
4.4kg/keg |
|
Powder（Component A） |
15.6kg/bag |
◇ Stirring Method：
△ Material ratio: 1 barrels of rubber emulsion material with 1 barrel of solid powder.
△ Stirring method: Latex and powder are mechanically stirred in the container, and they can be put into use when they are uniform.
◇ Construction Technology
：
：△ First, remove oil and dirt from the surface and keep it moist.
△ Ceramic finishing materials with high water absorption must be soaked in water before they can be used.
△ The laying thickness is generally between 7~8mm, and the laying amount is about 14~16kg per square meter.
◇ Attentions：
△ After the tiles and anti-skid bricks are laid, the operators are not allowed to enter the operation area within 24 hours at room temperature to avoid damage.
△ The application time of the stirred mixture is 1 hour, and the use effect will be affected if the application period is exceeded.
△ The product should be protected from sun exposure and rain impregnation, and the product shelf life is 3 months.
